I HAVE A HYUNDAI GAS ENGIINE GOLF CART WITH A 1991 8.5 SUZUKI ENGINE. V-271-001201 IS THE ENGINE ID NUMBER. THE ENGINE IS OBSOLETE BUT I WOULD LIKE TO KNOW IF I CAN CROSS REFERENCE THESE WITH ANOTHER TYPE ENGINE TO GET PARTS. SPECS. ARE 4 CYCLE, GASOLINE, OHV SUZUKI. SINGLE CYLINDER, BORE X STROKE 76X60MM, DISPLACEMENT 272CM, COMPRESSION RATIO 8.1:139642.5515392708
HiCustomer
What is the model number of the golf cart, please?
HYUNDAI HGG-1
Im sorry,Customer
I am unable to help you with your question. I have opted out and this will open the question up to the other experts.
Sorry for any inconvienence.
Best; THS
I know they put 8.5 suzuki engine on a 1991 toro rototiller is there any way to cross reference the bore and stroke to get a model# XXXXX my local lawn mower shop can order the parts needed to rebuild the engine
Hi MTM, This is Dave, The Small Engine Doctor. Virtually all OEM engine manufacturers build to certain ANSI specifications so that thier engines can be selected by the equipment makers according to small, medium and big block sizes. That way, a manufacturer can start using a different engine at any time during thier production run. So, to answer simply, yes!!! You might have to remove the engine first but if you were to give me the dimentions of the bolt pattern of the base, I can probable find you an engine that will bolt right in. What is also helpful is the dimentions of the bolt pattern on the side of the engine that has the clutch on it. Get back asap so I can start working on it. Sincerely, Dave
Thankyou so much I will reply tomarrow with all the dimensions
OK, I'll be here !!!