How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eddie Your Own Question
Eddie
Eddie, Home Improvement Contractor
Category: Small Appliance
Satisfied Customers: 569
Experience:  owner of Island Pro-Craft
90350505
Type Your Small Appliance Question Here...
Eddie is online now
A new question is answered every 9 seconds

I have a Deni 3500 meat grinder. The Feed screw needs

Customer Question

I have a Deni 3500 meat grinder. The Feed screw needs replaced. Where can I buy 0ne?
Submitted: 3 months ago.
Category: Small Appliance
Expert:  Eddie replied 3 months ago.

Hi George .......there are a few on this page that you might be able to retro fit them........I was on another site and Oester had one too ...........you would have to size it up and make a few phone calls to verify

http://www.ebay.com/sch/i.html?_odkw=deni+meat+grinder&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdeni+meat+grinder+feed+screw.TRS0&_nkw=deni+meat+grinder+feed+screw&_sacat=0

Thanks

eddie

Expert:  Eddie replied 3 months ago.

I hope you found my answers to your questions helpful and of sound value and would consider a positive rating so I may receive credit for my help. I'm very passionate and proud of my work here and the positive ratings given by clients like you!

Thanks

eddie

Related Small Appliance Questions