How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Small Appliance
Satisfied Customers: 16346
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Small Appliance Question Here...
Pete is online now
A new question is answered every 9 seconds

My needle keeps tting something on the bobbin case and

Customer Question

my needle keeps hitting something on the bobbin case and bending/breaking the needle..i have aken the case out and checked it but cannot fix the problem
Submitted: 1 year ago.
Category: Small Appliance
Expert:  Pete replied 1 year ago.

Hi there,

If you haven't already done so, check for a buildup of lint in the bobbin casing, which may be causing a jam. Clean it out if it hasn't been done in a while.

Also, if the needle is not inserted all the way, it can break while you sew because it goes down too deep into the bobbin case. So make sure the needle is fully inserted and always held tightly in place.