How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask The Appliance Guy Your Own Question
The Appliance Guy
The Appliance Guy, Home Appliance Technician
Category: Small Appliance
Satisfied Customers: 1300
Experience:  Owner/Technician of a Home Appliance Business for 6 years. 25 years electrical/mechanical experience.
Type Your Small Appliance Question Here...
The Appliance Guy is online now
A new question is answered every 9 seconds

How do I replace an agitator shaft on a kitchenaid stand mixer...

This answer was rated:

How do I replace an agitator shaft on a kitchenaid stand mixer... model KSM90
Hello, my name is XXXXX XXXXX I am here to assist you. Okay so you already have the metal ring off correct? If so then in the middle, not where the shaft comes down but exact middle of that area you will see a hole with a pin. You will need to get a punch and punch out that pin. Did the shaft come with a gear attached to the shaft?
Customer: replied 4 years ago.

I have to buy a punch...

Give me some time... After Labour Day



No problem. Have a great Labor Day.
Customer: replied 4 years ago.

got the punch, removed the pin and YES, there is a gear attached to

the shaft.

Customer: replied 4 years ago.

bought a punch...housing came off..the rest is EASY...removed snap ring,

gear lifted off...removed pin, shaft removed and replaced and reverse

to assemble....


thanx for the initial clue so I didn't tear the entire mixer apart!!!


U R D Best!!!


How do I pay and give review?


Pls. advise..


I'm better with mechanics than the internet!!!

You are welcome and great job on your part.
The Appliance Guy and other Small Appliance Specialists are ready to help you