How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, ASE Certified Technician
Category: Saturn
Satisfied Customers: 1082
Experience:  Dealer Auto Technician
Type Your Saturn Question Here...
Dan is online now
A new question is answered every 9 seconds

It did work for a while i kept hitting on the underside of

Customer Question

it did work for a while i kept hitting on the underside of the passenger side dash area the blower motor came on but now nothing 2001 saturn l200 help !!!!!!!!
JA: How long has this been going on?
Customer: well since feb then it did not work since then
JA: Are you fixing your L200 yourself? What have you tried so far?
Customer: yes i am i thought the blower motor was under the pass side dash but i pulled out the clips and it does not appear so i have a blower motor but unsure now if it is the right one in the right location
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 1 month ago.
Category: Saturn
Expert:  Dan replied 1 month ago.

Hello my name is***** am an ASE Master Technician and I am glad to help you out with your question.

Expert:  Dan replied 1 month ago.

Should be up under the passengers dash.

Expert:  Dan replied 1 month ago.

Actually its not, it is under the hood, below the wiper motor.

Expert:  Dan replied 1 month ago.

Removal & Installation

  1. Turn ignition on. Select fresh air inlet on heater control panel. Disconnect negative battery cable. Open hood and remove wiper arm assemblies. Remove cowl screen retaining nuts and remove cowl assembly.
  2. Move locking tabs outward to remove filter. Remove filter housing bolts and housing. Release locking tabs and remove blower motor housing. Disconnect blower motor connector before removing blower motor. Remove blower motor by lifting it straight up. See Fig 1. To install, reverse removal procedure. Install a NEW filter housing seal whenever filter housing is removed.
Expert:  Dan replied 1 month ago.

Please RATE at the top of the screen and it would be greatly appreciated, thanks.

Expert:  Dan replied 1 month ago.

Hello again Dan here,

I am contacting you because the post has not been closed or rated.

This question is coming up on 7 days which means it will time out and close.

You have already paid to get this question answered, but you have not rated.

Let me help some more. Is there anything else I can help you with?

If I did not give you 5 star service, please let me know what I missed.

I do not get compensated for my time and resources unless you rate me.