How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Saturn
Satisfied Customers: 806
Experience:  ASE Master Tech 15+ Years
Type Your Saturn Question Here...
George H. is online now
A new question is answered every 9 seconds

I have a 2001 Saturn LW300 that would stall. after I let it

Customer Question

I have a 2001 Saturn LW300 that would stall. after I let it sit for 5 minutes it would start and be fine for a few days then it would happen again. I went to auto-zone and they did a scanner check and it said my Crank position sensor was bad. I replaced the sensor and now it wont start at all.
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: Yes it did at first then when I would start it all it would do is start then idel high then shut down.
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have replaced the cam position sensor and also the crank sensor since thats what auto-zone stated the problem code was.
JA: Anything else you think the mechanic should know?
Customer: I looked up on line and all the problems it was doing point to the crank sensor.
Submitted: 1 month ago.
Category: Saturn
Expert:  Amedee replied 1 month ago.

Hello and welcome! My name is ***** ***** I can assist you with your question. Can I start by getting your VIN?

Customer: replied 1 month ago.
I don't have that info in front of me I am at work.
Expert:  Amedee replied 1 month ago.

NO prorblem. No worries. So the engine currently cranks over but does not start? Does it have spark?

Customer: replied 1 month ago.
it has spark
Expert:  Amedee replied 1 month ago.

Thank you for that information. Does it run on starting fluid?

Customer: replied 1 month ago.
I have not tried starting fluid.
Customer: replied 1 month ago.
Before I replaced the Crank sensor that I purchased at atuo zone it would start then rev up then stall. Now it wont start at all.