How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Saturn
Satisfied Customers: 807
Experience:  ASE Master Tech 15+ Years
13574682
Type Your Saturn Question Here...
George H. is online now
A new question is answered every 9 seconds

My 2007 Saturn vue will start and run 10 seconds then dye.

Customer Question

My 2007 Saturn vue will start and run for about 10 seconds then dye. If you just turn the key, without turning the key to off, it won't even start. If you turn the key to off then start it, it will run for another 10 seconds and dye. I have checked the fuel pressure and it is 60 lbs. I changed the oil pressure switch thinking that might be shuting it down. All this is after I replaced the engine. The engine I took out didn't do this. HELP !
Submitted: 6 months ago.
Category: Saturn
Expert:  Dan replied 6 months ago.

Hello, my name is***** the mass airflow sensor and let me know if that helps. Thanks.

Customer: replied 6 months ago.
It won't start at all.
Expert:  Dan replied 6 months ago.

Have you tried to do the security relearn procedure?

Customer: replied 6 months ago.
No.
Expert:  Dan replied 6 months ago.

Here is procedure.

-

b. Turn the ignition off for 1 minute.

c. Turn the ignition switch to the crank position and then back to the run position. Leave the ignition switch in the run position for at least 10 minutes, but not more than 11 minutes. Go by the clock.

d. Turn the ignition off for 10 seconds.

e. Repeat steps 3 and 4 two more times.

f. Start the engine.

Customer: replied 6 months ago.
that didn't work.
Expert:  Dan replied 6 months ago.

Have you checked diagnostic codes? Is it still starting then stalling? Thanks.

Customer: replied 6 months ago.
No codes and it is still dying
Customer: replied 6 months ago.
now it has a code 108 Map/ baro
Customer: replied 6 months ago.
I took the air tube off. Will that cause the code? Where is the map/baro? Inside the air cleaner housing?
Customer: replied 6 months ago.
fixed it. Replaced the ECM.