How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Saturn Technician
Category: Saturn
Satisfied Customers: 46501
Experience:  16 years of experience
2499435
Type Your Saturn Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Have an issue with the timing chain on my Saturn

Customer Question

Have an issue with the timing chain on my Saturn
Submitted: 1 year ago.
Category: Saturn
Expert:  Chris (aka- Moose) replied 1 year ago.

Welcome, I am Chris (aka-Moose)

You wrote that you set it up incorrect. So it seems you know what is wrong.

How can I help you?

----------Once you get an answer----------

1) Please realize I base my info requests and answers on what you type. The more you can tell me the faster and better I can help.

2) You have already been charged the full question value. Rating, good, bad, or not at all has no bearing on what you've paid.

3) I am not an employee for Just Answer, I am paid by the customer from your deposit, but only when you rate my answer.

5) You will notice it says rate to finish, rating does not close the post, or end our conversation. If you can not rate me, please let me know why.

6) I am going to stay in contact with you until you respond and tell me your happy or pleased with the answer. So please reply and let me know the progress on the issue and our discussion or if more help is needed.

Thanks Chris

Customer: replied 1 year ago.
When I set up my chain the intake cam sprocket pointer was at exhaust and the exhaust cam sprocket was at intake is that ok or should they have been set at 180 degrees .the opposite
Expert:  Chris (aka- Moose) replied 1 year ago.

Below is a link showing and explaining how to correctly time this engine.

https://dl.dropboxusercontent.com/u/90220402/timingchain.pdf