I have a 2005 Saturn Vue AWD, 2.2L. I have replaced the EPS but when I turn on the car it turns the wheel all the way to the left and cannot be turned back unless I turn the car off. I believe this EPS must be programmed but I do not know how to do this. Can you tell me how I can program this for my car?
Country: United StatesMake: SaturnModel: VUEYear: 2005Engine: 2.2L
I have tried turn off the engine and turning it back on to program this EPS but it has not worked
Hello and thank you for trusting me with your question. My name is XXXXX XXXXX X will do my best to help you with your Saturn problem.Did you replace the steering assist motor, or the steering column/sensor?
I replaced the entire unit that slips into the steering column and contains the electric motor and control module.
Thanks for the information. The new unit does need to be programmed to center up the steering assist unit. This must be done using the dealers scan tool, unfortunately there is no alternate method for this programming. If you would like any additional information or have more questions please don’t hesitate to ask! Please remember to only rate my service when you are satisfied. IF you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have. I will be happy to continue further and do everything I can to provide you with the service you seek.I am not paid unless I get a rating of 3 to 5 Stars/Smiley Faces. If I have helped you with your question, please give me an appropriate rating so that I get credit for helping you.Thank you,David
ASE Master Certification. GM World Class Certification