How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask john -aka eauto Your Own Question
john -aka eauto
john -aka eauto, The Car Guy
Category: Saturn
Satisfied Customers: 15062
Experience:  ase tech 15 + years foreign domestic & european
6149662
Type Your Saturn Question Here...
john -aka eauto is online now
A new question is answered every 9 seconds

How do I reset the immobiliser in a 2002 saturn sl2?

This answer was rated:

How do I reset the immobiliser in a 2002 saturn sl2?
is the theft light on?
Customer: replied 6 years ago.
The security light is currently flashing.

here ya go

relearn

GM:

10 Minute Learn Procedure
Tools Required:
None

Turn ON the ignition, with the engine OFF.
Attempt to start the engine, then release the key to ON (vehicle will not start).
Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF.
Turn OFF the ignition, and wait 5 seconds.
The vehicle is now ready to relearn the PasslockTM Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK.

Important
The vehicle learns the PasslockTM Sensor Data Code and/or password XXXXX the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.


Start the engine. The vehicle has now learned the PasslockTM Sensor Data Code and/or password.
With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. __________________


john -aka eauto and 3 other Saturn Specialists are ready to help you

Related Saturn Questions