How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cartech Your Own Question
cartech
cartech, ASE Certified Technician
Category: Saturn
Satisfied Customers: 3332
Experience:  25 year master tech and shop owner
1511099
Type Your Saturn Question Here...
cartech is online now
A new question is answered every 9 seconds

Saturn: torque specs..head bolts..valve bolts, single cam

Customer Question

what are the bolt torque specs for a 1998 1.9 saturn head bolts and valve bolts, single cam
Submitted: 6 years ago.
Category: Saturn
Expert:  cartech replied 6 years ago.
is it a single cam or a dual cam
Customer: replied 6 years ago.
single cam
Expert:  cartech replied 6 years ago.

Important: The following steps must be completed in sequence. This will ensure uniform bolt tension.

  • Cylinder head bolt tightening procedure:
  • In sequence, torque the cylinder head bolts.
    Object Number: 879439  Size: SH

    Tighten
    Tighten the cylinder head bolts - first pass to 30 N·m (22 lb ft).

  • In sequence, torque all bolts.

    Tighten
    Tighten the cylinder head bolts - second pass (SOHC) to 45 N·m (33 lb ft).

  • Install the SA9140E or equivalent, Snap-On® Tool 360 or equivalent.
  • Calibrate the gauge to zero.
  • In sequence, turn each bolt an additional 90 degrees - final pass.
  • Expert:  cartech replied 6 years ago.

    this is for the rocker shaft

     

    Rocker Arm Shaft-to-Head

    25 N·m

    19 lb ft