How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mark N Your Own Question
Mark N
Mark N, Saab Master Technician
Category: Saab
Satisfied Customers: 117
Experience:  30+ years experience on all models of Saabs!
22700663
Type Your Saab Question Here...
Mark N is online now
A new question is answered every 9 seconds

Seems like I have had to replace the crankshaft bearing seal

Customer Question

Seems like I have had to replace the crankshaft bearing seal because it keeps leaking. Why is that
Submitted: 10 months ago.
Category: Saab
Expert:  Jerry replied 10 months ago.

Hello and welcome. My name is ***** ***** you for visiting the site.

.

Sometimes they wear out but if there is high crankcase pressure it will cause it to leak. There has been a service bulletin for that, with instructions on how to repair it.

.

If you give me your email address, I can get the bulletin with the instructions for it and put it in a PDF file, (it is rather large) and send it to your email address for as little as possible.

.

You will just have to accept the additional service offer and ENTER your email address in the “ENTER CONTACT INFO” section so that I can see it, Thanks