How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
19317657
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

Havea Winnebago MH on FL chasis, w C7 engine. Been running

Customer Question

Havea Winnebago MH on FL chasis, w C7 engine. Been running great in mountains, but started getting "check engine" light and goes into inhibit mode when climbing, speed drops to 60mph and rpm drops to 2,000. As soon as I get on level, light goes off and engine runs great. I checked oil, was down to "add oil" line. Added 1 qt, ran well for about 1 hr, then it started inhibiting at same specs. Any suggestions until I find a shop to scan the codes? Stopped in rest area forb the night.
JA: What is the complete model and serial number of your machine?
Customer: 10p92h251195
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: 2007 Winnebago Journey wkp39k, NPV tyoe
Submitted: 1 month ago.
Category: RV
Expert:  Fix-it.. replied 1 month ago.

Good aftrnoon

i will need the engine serial number

plus we can get the codes from your cruz switches,key on engine off move the switch to the res/acc and then quickly to the set/coast postion and the check engine light will start to flash..count the flashes flash flash pause flash is 21 and so on,Please try to get me those numbers

thanks

Expert:  Fix-it.. replied 1 month ago.

Good afternoon

havent heard from you,do you still need help ??