How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert
Robert, RV Mechanic
Category: RV
Satisfied Customers: 12657
Experience:  18 yrs. RV experience including Cummins North West, Country Coach, Monaco Coach - vendor certified.
3862310
Type Your RV Question Here...
Robert is online now
A new question is answered every 9 seconds

Installed a new Shurflo 8000-713-238. Pump starts on demand

Customer Question

Installed a new Shurflo 8000-713-238. Pump starts on demand but cycles with a 02 or 04 tool. The old pump did not cycle. Is there an adjustment beyond what I've tried? With a hex wrench i turned up to 1 1/2 turns cw and ccw
Submitted: 5 months ago.
Category: RV
Expert:  Robert replied 5 months ago.

Hi my name is Robert.....

Click HERE and have a look that would be how to adjust the pump if you have that screw. IF not make sure your inlet side is tight, if the inlet was loose or you had a cracked fitting then the water pump would suck air and cause it to cycle..... Hope this helps some... Robert

Expert:  Robert replied 4 months ago.

Hi was just checking in to see if my answer helped??? IF you have more questions or concerns please feel free to contact me..

Robert

Customer: replied 4 months ago.
No difference. Machine still on the bench.
Expert:  Robert replied 4 months ago.

OK

I might contact shurflo directly and see if they would warrant that new pump, possible you got a bad pump, have seen that before right out of the box. Click HERE for the contact info, they are normally pretty good on warranty with there pumps, but maybe they would have some more input as well..... Robert