How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall Your Own Question
Randall, RVIA Certification
Category: RV
Satisfied Customers: 10273
Experience:  RVDA/RVIA Master Certified Technician with many years experience.
Type Your RV Question Here...
Randall is online now
A new question is answered every 9 seconds

The dimensions were not the same for the NT30SP as our Hydro

Customer Question

The dimensions were not the same for the NT30SP as our Hydro Flame.
Ours are 23.5 x 13 x 12.5 and we don't have any room to spare for installation. The NT30SP's dimensions are:
Submitted: 1 month ago.
Category: RV
Expert:  Randall replied 1 month ago.

Hi! My name is ***** ***** I can assist you with this. I may need some additional information from you first in order to give a complete answer.

Expert:  Randall replied 1 month ago.

Then is you don't have any extra room, I would rebuild that one. Much cheaper. Put in a new motor and sail switch and limit switch and a new Dinosaur Electronics control board if you don't already have one. And you don't need to open up a new question each time. Just return to the original thread.