How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

Schwintek slide is out and can not be retracted. Based on

Customer Question

Schwintek slide is out and can not be retracted. Based on advice from Forest River, I disengaged the motors to manually retract.. Now I can not renegade the motors. They need to turn and drop into a gear box and I can not turn them
JA: How old is the transmission? Have you checked the brake switch?
Customer: 2013, what brake switch?
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I have reset the controller several times. I just need the motors to re-engage in the gear box
JA: Anything else you think the mechanic should know?
Customer: They need to line up with locating holes and the motor will not turn enough to do that
Submitted: 3 months ago.
Category: RV
Expert:  Randall replied 3 months ago.

According to the flashing error code.........what was the problem?

Expert:  Randall replied 3 months ago.

Just checking back in to see if you missed my earlier responses to your question? If you move the room out slightly, the motor should drop back in. It would be good here, if you still need some assistance to know why you had to remove it in the first place.

Related RV Questions