How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190
peterpete190, Auto Technician
Category: RV
Satisfied Customers: 24656
Experience:  Over 17 years diagnosing and repairing various model vehicles.
14928985
Type Your RV Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

I have 2004 Workhorse 8.1 with Allison trans. The issues I

Customer Question

I have 2004 Workhorse 8.1 with Allison trans. The issues I have is when I shift into reverse the cluster does not see this position and flash R and will be in no gear. I have to put it in park and turn the engine off then restart shift into reverse to back up, and not always on the first try. I had replaced the
JA: How old is the transmission? Have you checked the brake switch?
Customer: I replace the neutral safety back up switch 2 years ago and the problem seemed to go away, but the same thing has happened when putting drive.
JA: What is the model of your '04 Chevy?
Customer: 04 bounder motor home I think it is a w22
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: yes the only thing that I have tried is the nsbs replacement
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Chevy Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: RV
Expert:  peterpete190 replied 4 months ago.

HI my name is ***** ***** I will be happy to assist with this.

I would have the neutral safety switch inspected for any issues as these are common to fail even soon after they have been replaced.I would have the wires checked to the switch as well as the connections for any issues as well.

Let me know if you need anything else and feel free to rate my help here.

Thanks Pete