How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall Your Own Question
Randall
Randall, RVIA Certification
Category: RV
Satisfied Customers: 10331
Experience:  RVDA/RVIA Master Certified Technician with many years experience.
21664427
Type Your RV Question Here...
Randall is online now
A new question is answered every 9 seconds

The slider is almost all the way out but not on one side it

Customer Question

Hi the slider is almost all the way out but not on one side it will not move at all now one side is tigth
JA: What is the model/year of your RV?
Customer: it is a 93 snow bird
JA: What year is your RV?
Customer: it is a 93
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: I would like to fix it my self if I can
JA: Anything else you think the mechanic should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the RV Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: RV
Expert:  Randall replied 5 months ago.

It sounds like you sheared off a drive pin on the tracking mechanism and that is causing one side to lag behind. This isn't a difficult fix, as long as you didn't jam the room too tightly in the cocked position. Can you attach a photo of the underside of the room out near the ends of the rails so I can see if I can spot the problem? All follow ups are included in our fee.

Customer: replied 5 months ago.
will send you a pic but will be tomorrow is this OK
Expert:  Randall replied 5 months ago.

Sure.........I am here every day.

Customer: replied 5 months ago.
Hi IM going to try too get back at my trailer on Sat have my own work sometimes it gets very busy Thank you i will be talking to you again
Expert:  Randall replied 5 months ago.

10-4. No hurry............just get back to me when it is good for you. I check in all the time.

Customer: replied 5 months ago.
Sorry no time to work on my trailer maybe tomorrow
Expert:  Randall replied 5 months ago.

O.K.......

Expert:  Randall replied 4 months ago.

Just checking back in to see if you were able to resolve this issue or do you still need some additional input from me here?

Customer: replied 4 months ago.
Hi I have to remove the underside of my trailer so I can see what is going on there will send you some pic when I get it done sorry for taking so long but very busy Thanks Jim
Expert:  Randall replied 4 months ago.

Not a problem, Jim.........I will keep an eye out for your post.