How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall Your Own Question
Randall
Randall, RVIA Certification
Category: RV
Satisfied Customers: 10328
Experience:  RVDA/RVIA Master Certified Technician with many years experience.
21664427
Type Your RV Question Here...
Randall is online now
A new question is answered every 9 seconds

Have analog controller, domestic air conditioner, suburban

Customer Question

Have analog controller, domestic air conditioner, suburban propane furnace. Have two molded pair wires that I don't know where to connect them or wires from controller to these two mold pair wires. One molded pair is a white wire the other a violet with white stripe. The other molded pair wires is one white wire and the other is blue with white stripe. Maybe t-stat wires to these molded pairs?
Submitted: 5 months ago.
Category: RV
Expert:  Randall replied 5 months ago.

It sounds like those are the positive and negative pairs. Take a small digital multimeter and test them. The plain white should be the negative. The stripped wires should be the positive. Were these controls all disconnected?

Expert:  Randall replied 5 months ago.

Just checking back in to see if you were able to resolve this or do you still need some additional input from me here?