How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall Your Own Question
Randall
Randall, RVIA Certification
Category: RV
Satisfied Customers: 10327
Experience:  RVDA/RVIA Master Certified Technician with many years experience.
21664427
Type Your RV Question Here...
Randall is online now
A new question is answered every 9 seconds

2007 steps will not raise up....where are the fuses located

Customer Question

2007 steps will not raise up....where are the fuses located for the strp
JA: Sometimes things that you think will be really complicated end up being easy to fix with RV. The RV Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: steps are out but will not go in when the door is shut
JA: Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: everything , it seems there is no power to the step
JA: Is there anything else the RV Mechanic should be aware of about your RV?
Customer: it is in tip top shape except for the step that will not retract
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the RV Mechanic about your situation and then connect you two.
Submitted: 7 months ago.
Category: RV
Expert:  Randall replied 7 months ago.
Check the switch that locks it out...........that is the usual problem when this happens. Near the door on the wall on most units. Please get back to me if we need to dig deeper into this as all follow ups are included in our fee.
Expert:  Randall replied 7 months ago.
Just checking back in to see if you were able to resolve this or do you still need some additional input from me here?