How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: RV
Satisfied Customers: 4878
Experience:  Owner at DJ Wilson
65405794
Type Your RV Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 2005 Mandalay motorhome ( four winds) with a 400 HP

Customer Question

I have a 2005 Mandalay motorhome ( four winds) with a 400 HP Cummins, I seem to have a fuel pump problem. It cranks but does not seem to be getting fuel. Where is the fuel pump located, and how do I get to it?
Submitted: 1 year ago.
Category: RV
Expert:  Daniel Wilson replied 1 year ago.
Hi Greg, My name is***** will be glad to try to help but I need the complete engine model number from the engine ID tag so I know what engine you have and fuel system. Let me know
Customer: replied 1 year ago.
Where do I fgind that engine I'd tag at?
Customer: replied 1 year ago.
I have the vin 4uzabfcy65cv33541 but cannot find an engine id
Customer: replied 1 year ago.
It is an isl if that helps
Customer: replied 1 year ago.
I have looked all over for the tag but have not found it and I cannot see thevstamp on the block
Expert:  Daniel Wilson replied 1 year ago.
There will be a tag on the valve cover or on the left front side of the engine timing cover.
Customer: replied 1 year ago.
I found a spotbwhere it says the engine number Is ***** is that the I'd number?
Expert:  Daniel Wilson replied 1 year ago.
Does this look like your engine?ISL
Expert:  Daniel Wilson replied 1 year ago.
Sorry for any delay as I can only answer in between jobs etc. It is a busy Monday here.
Customer: replied 1 year ago.
Yes
Expert:  Daniel Wilson replied 1 year ago.
If you have the CAPS fuel system you will need special tools for diagnostics and Cummins Insite diagnostic software to troubleshoot this properly. What do you have for fault codes logged in the ECM? click on this link for the troubleshooting Manual. Let me know what you have for fault codes.Troubleshooting
Expert:  Daniel Wilson replied 1 year ago.
Hi, Did you get this resolved? Please remember to rate my service as that is how the site credits the experts for their time helping on the site.