How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall Your Own Question
Randall
Randall, RVIA Certification
Category: RV
Satisfied Customers: 10335
Experience:  RVDA/RVIA Master Certified Technician with many years experience.
21664427
Type Your RV Question Here...
Randall is online now
A new question is answered every 9 seconds

We need to add a lift to replace the outside steps into our

Customer Question

We need to add a lift to replace the outside steps into our Cyclone 4200.
We need this because my 96 year old father in law cannot navigate the steps.
How can we get this dne and where do we go to accomplish this?
Submitted: 10 months ago.
Category: RV
Expert:  Randall replied 10 months ago.

Are you talking about an electric wheelchair lift?

Expert:  Randall replied 10 months ago.

Burr Engineering makes a good one that I have installed in my own shop for a wheelchair customer. Great product and easy to install. Person can stand on it as well and be lifted up into the coach. You may need to shop around for a good price and someone to install it. If you need help with that let me know. See their website or call them at(###) ###-#### Let me know where you are and that would help. Price should be about $1,500 or so plus installation. Hope that proves helpful here.

Expert:  Randall replied 10 months ago.

I am adding a link to the Burr website for you............get back to me if you need more on this or help with a dealership that can do this for you. OR perhaps a mobile tech in your area can do it. Not that hard. http://www.mobile-lifts.com/

Expert:  Randall replied 10 months ago.

Attached is a link to the manual. Print out a copy so you have it for later. Good information in there! http://bryantrv.com/docs2/docs/hflamefurn04.pdf

Expert:  Randall replied 10 months ago.

Sorry for that last post..........ignore it as that was for another customer.

Expert:  Randall replied 10 months ago.

Just checking back in to see if that information on the Burr lift was helpful or do you still need some assistance with this?