How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert
Robert, RV Mechanic
Category: RV
Satisfied Customers: 12183
Experience:  18 yrs. RV experience including Cummins North West, Country Coach, Monaco Coach - vendor certified.
3862310
Type Your RV Question Here...
Robert is online now
A new question is answered every 9 seconds

We have "el home failure" showing on the screen when trying

Customer Question

We have "el home failure" showing on the screen when trying to replace the dish for traveling. Thank you Tim and Judy
Submitted: 1 year ago.
Category: RV
Expert:  Robert replied 1 year ago.

Hi my name is Robert....

IS this a Traveler Sat dish?

Expert:  Robert replied 1 year ago.

IF this is a Winegard Traveler try the procedure below, if that will not work let me know the model of the dish......

Press [POWER] and hold for 2 seconds to turn “ON” the TRAV’LER Interface Box. Wait until the Interface Box finishes “connecting to antenna”. 2. Press [ENTER] and hold for 2 seconds or until the unit displays “Enter User Menu”. Press [SELECT] to move the asterisk to “Yes”. Press [ENTER]. 3. Press [SELECT] to move the asterisk to INSTALLATION. 4. Press [ENTER]. You will be asked to provide a code to enter the Installation Menu. 5. Press [ENTER] 4 times to enter code 0000. 6. From the Installation Menu, 7. Press [SELECT] to move “ * ” to “Calibrate EL” and Press [ENTER]. 8. Press [SELECT] to move “ * ” to YES. 9. Press [ENTER] to start the elevation calibration procedure. The LCD should now display “ Calibrate EL In Progress ...”. 10. After a few moments the IDU LCD will display “On EL Hard Stop? Yes *No”. Visually examine the antenna to verify that the antenna is against the Hard Stop. The antenna will be pointing as far up as it can go, this is the Hard Stop. 11. Press [SELECT] once to move asterisk to “Yes” if antenna is on the Hard Stop. 12. Press [ENTER] and the LCD will display “Calibrate EL Success”. 13. Press and Hold [POWER] for 2 seconds to to stow the antenna.

Robert