How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Hank F. Your Own Question
Hank F.
Hank F., RV tech - emphasis on gensets
Category: RV
Satisfied Customers: 14479
Experience:  RV tech since the beginning of the millenium.
19372534
Type Your RV Question Here...
Hank F. is online now
A new question is answered every 9 seconds

I Have a spec BGE spec g That will not start and will not

Customer Question

I Have a spec BGE spec g That will not start and will not run
Submitted: 1 year ago.
Category: RV
Customer: replied 1 year ago.
It will not start because the oil pressure wire is broken and I need to know where it hooks up into the board?
Expert:  Hank F. replied 1 year ago.

Hello, my name is ***** ***** I am going to assist you with this.

The oil pressure switch will connect to the 6-pin connector, at pin J2-4. It will be the 6-pin connector on the left side of the board, not on the right side.

.

Customer: replied 1 year ago.
Where does the fuel pump connect to?
Expert:  Hank F. replied 1 year ago.

The fuel pump connects to pin J1-6 of the same 6-pin connector.

Customer: replied 1 year ago.
The connector on the left hand side of the board I thought was for the remote start inside the cab
Customer: replied 1 year ago.
Are you online today?
Expert:  Hank F. replied 1 year ago.

I am now.

Expert:  Hank F. replied 1 year ago.

The remote connector is the one on the right side of the board.

The left side is the 6-pin and 8-pin connectors.

Expert:  Hank F. replied 1 year ago.

Was this what you wanted to know?

.