How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Reush Your Own Question
Michael Reush
Michael Reush, RV Technician
Category: RV
Satisfied Customers: 3249
Experience:  Serving the rv industry since 1977
Type Your RV Question Here...
Michael Reush is online now
A new question is answered every 9 seconds

I have a 85-11 furnance in my park trailer and I'm down to

Customer Question

I have a 85-11 furnance in my park trailer and I'm down to the part to take out the motor but there is no clamp that holds the motor in place. l can see the ends of 4 screws on the blower side and how to get to the head of these screws with the shrod and the exhaust wheel in the way. any help on what to do next?
Submitted: 1 year ago.
Category: RV
Expert:  Michael Reush replied 1 year ago.

Hi you need to remove the exhaust wheel to access the nuts that hold the motor in, I remove the whole assy left and right and take the blowers off on the bench..........

Expert:  Michael Reush replied 1 year ago.

pull the blower assy off look at where it attaches to the fire box, there are several 1/4" headed screws to remove

Related RV Questions