How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gene Your Own Question
gene
gene, RV Mechanic
Category: RV
Satisfied Customers: 1100
Experience:  28 yrs exp in the industry
19317657
Type Your RV Question Here...
gene is online now
A new question is answered every 9 seconds

Can you give us instructions the hole in a Keystone

Customer Question

Can you give us instructions for putting the hole in a Keystone Raptor King Suite 425 for your washer dryer combo or let us know where to get them
Submitted: 1 year ago.
Category: RV
Expert:  Michael Reush replied 1 year ago.
Hi are you installing a splendide washer/dryer, and looking for the vent , and how to install it? thanks
Customer: replied 1 year ago.
yes - we have the vent - just wondering about the instructions to drill the hole
Expert:  Michael Reush replied 1 year ago.
you need to measure the location of the vent on the washer, then transpose that mark on the interior wall, use a hole saw of that size to cut the opening, when the drill point goes thru the outside panel, withdraw the saw from the interior, and finish the hole from the outside, this gives a smoothe hole