my lights and ceiling fan inthe bathroom sink lights went out and light above the sink went out when I was shaving. looked at no. 2 and 3 fuse, but are both good. what next?
Make (other): designer
checked all fuses
Hi: Thank you for coming to Just Answer with your question. My name is XXXXX XXXXX perhaps I can assist you with this issue.
Are these 120 VAC lights or 12 VDC lights........does the plug still work where you were shaving?
the shaver was pluged in to anther outlet. the gfi outlet
Is that still working or not? And are the lights AC lights or DC lights?
yes its still working. am pluged into reg power metered at this seasonal site.
Doubtful then the shaving had anything to do with it unless the vibration somehow affected the power to the fixtures. Those are probably DC 12 Volt lights and if you have a 12 VDC test light you can test for power to the switch and see if you have power there. If not, you need to go back towards the power center and the fuses. I would double check all of them there. You just need to ground the alligator clip on the one end and then probe the switch or fuses with the other. When power is there is lights up. I rig up a long wire to the power center ground for this. That is the fastest way to track this down. Get back to me with what you find. All follow ups are included in our fee. R.J.
RVDA/RVIA MASTER CERTIFIED TECHNICIAN WITH MANY YEARS EXPERIENCE
I will try that and see if it works. how do I get back to you if it doesn't work. We will first going back to the trailor this weekend. to see if it can work. thank you for this help.
Bookmark this and you can come right back to it. R.J.