How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Engineer
Category: Recorders and Players
Satisfied Customers: 16512
Experience:  Over 16 years experience installing and repairing electronics.
30970729
Type Your Recorders and Players Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a Panasonic Recorder DMR - XW450 and trying to add

Customer Question

Hi I have a Panasonic Recorder DMR - XW450 and trying to add new Channels Nos.13 &76. It Auto pick up these new Channels but when I went to access them I had a message No Video. (I had sound) So I went to Auto Tunning in the Set Up but when said OK I lost both Channels. I then went into Set Up - Add new DVB Channels but it hasn't picked up these two new channels. Any ideas in how to add these new channels,
Cheers
Chris
Submitted: 11 months ago.
Category: Recorders and Players
Expert:  Pete replied 11 months ago.

Hi Chris,

Expert:  Pete replied 11 months ago.

If you are still having difficulty with this then the signal may not be strong enough in your area.

Try fitting a signal booster and let me know if that helps:

http://www.dicksmith.com.au/tv-video-accessories/ofa-tv-antenna-signal-amplifier-and-splitter-dsau-l4181