How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Louie Your Own Question

Louie
Louie, Technician
Category: Recorders and Players
Satisfied Customers: 678
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your Recorders and Players Question Here...
Louie is online now
A new question is answered every 9 seconds

Have a Sanyo VHR M490-SP but no instructions. I run my

Customer Question

Have a Sanyo VHR M490-SP but no instructions. I run my decoder through the Recorder and then to my TV. If I try connecting direct I do not get a signal. More by luck than good judgement I have obtained my decoder signal to my TV now all I need to know is how do I record programmes from the decoder.
Submitted: 11 months ago.
Category: Recorders and Players
Expert:  Michael replied 11 months ago.

Hi are you sure thats the model ?

Also how old is your VHR?

Thank you

Tech Michael

Customer: replied 11 months ago.
that is the model I thought that VHR was strange but that is on the plate. VHR M490SP. I bought it second hand from my local charity shop it had been tested but no user manual and of course I picked the one where there is no on-line manual.
I do live in Spain but that should make no difference.
Expert:  Michael replied 11 months ago.

Hi I am searching for the user manual for you