Hello, code P0341 is the camshaft position sensor. If the PCM receives an incorrect number of pulses on the Cam reference circuit, DTC P0341 will set and the PCM will initiate injector sequence without the Cam signal with a one in six chance that injector sequence is correct. The engine will continue to start and run normally, although the misfire diagnostic will be affected if a misfiring condition occurs. It is mounted in the top of the engine block on the passenger side of engine.
The wiring and connector will need to be inspected for any problems, and if none our found will probably need a cam sensor replaced
Removal Procedure
I hope this info was helpfull and if there is anything you dont understand please ask me to explain
ASE Certified Technician
Ase Master Certified, GM Master Certified Tech. Awarded GM Top performer,