Answer

Removing

• Remove door panel
• Disconnect electrical connector.
• Bend out switch mounting frame on the long side -A- and push out switches from frame.

Installing

• Insert switch -A- in mounting frame and engage.
• Connect electrical connector.

	View Full Image

 

Here is how to remove the door panel, if needed:

insert a small screwdriver in lower separating joint between trim -7- and grip recess -2-, carefully press off in direction of door trim. When removing grip recess do not grasp in grip depression an inner door support is secured to trim from back side.

 

Unclip and remove grip recess -2- upward from door trim

 

Remove locking device -1- in direction of arrow and disconnect connector -2-.

 

Remove three Phillips screws along bottom of panel

 

Remove bolts -arrows

 

• Unclip side of door trim -1-with pliers 3392.
• Pull door trim up and out of window slot.
• • Pull cable -1- out of guide -2- in direction of arrow and unhook.
  • Disconnect connectors -3- and -4-.