Car

Ask a Car Question, Get an Answer ASAP!

Have your own Car question?

16 Auto Mechanics are Online Now

characters left:

Not a Car Question?

Question

I have a 1986 toyota 4x4 truck with the 22r efi engine, I recently replaced the head gasket, but now I can't get it to start, I am getting fire, cause it will start with starting fluid, and I am getting fuel up to the fuel rail, but it wont' start and run, and I can't believe that all of the injectors could be out. Any suggestions?

Submitted: 1195 days and 22 hours ago.

Category: Car

Value: $15

Status: AWAITING CUSTOMER ACTION

Optional Information:
1986 Toyota 4x4 Pick Up 22R EFI

Posted by RonRepair 1195 days and 22 hours ago.

Info Request

When you pulled the head, did disconnect the loom at the ECU in the right kick panel or did you remove the manifold?

Did this problem start immediately after you got it back together?

1186 days and 19 hours ago.

Reply

Reply to RonRepair's Post: when I pulled the head, I removed the manifold and all of the wires and hoses individually. The problem started for the most part right after I put it back together, but since the head gasket was blown, I could't get it to run right before I took it apart either, any more suggestions?

1185 days and 14 hours ago.

Reply

Relist: I still need help.

Answer

If I remember correctly, 86 had a cold start injector in the middle of the upper intake manifold so take that loose/out of the manifold with the fuel supply line still attached and the harness connector still attached and see if when you crank it over does fuel spray out of the cold start injector.

Expert:	Sparkybuoy
Pos. Feedback:	92.9 %
Accepts:	193
Answered:	8/10/2006

Auto Mechanic

20 years experience

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Car

Have your own Car question?

Question

Optional Information

Optional Information: 1986 Toyota 4x4 Pick Up 22R EFI

Info Request

When you pulled the head, did disconnect the loom at the ECU in the right kick panel or did you remove the manifold? Did this problem start immediately after you got it back together?

Reply

Reply

Relist: I still need help.

Answer

If I remember correctly, 86 had a cold start injector in the middle of the upper intake manifold so take that loose/out of the manifold with the fuel supply line still attached and the harness connector still attached and see if when you crank it over does fuel spray out of the cold start injector.

Related Car Questions

Optional Information:
1986 Toyota 4x4 Pick Up 22R EFI

When you pulled the head, did disconnect the loom at the ECU in the right kick panel or did you remove the manifold?

Did this problem start immediately after you got it back together?