Answer

A putty knife will work to pop the clips loose instead of the special tool.

Trim Panel Replacement - Side Front Door

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

	View Full Image




	View Full Image



1. Remove the door handle bezel. Refer to Handle Bezel Replacement - Inside - Front
2. Remove the door panel retaining screw located in the handle bezel opening.
3. Remove the door window switch. Refer to Switch Replacement - Door Lock and Side Window - Driver or Switch Replacement - Door Lock and Side Window - Passenger .
4. Use special tool J 38778 to release the door trim panel retaining clips.
5. Disconnect the electrical wiring harness connectors.
6. Remove the door trim panel from the vehicle.

   Handle Bezel Replacement - Inside - Front

   Removal Procedure

   
   

   	View Full Image

   
   

   	View Full Image

   
   
   1. Remove the screw that retains the front inside handle bezel to the door panel.
   2. Remove the bezel from around the door handle,
   3. Remove the bezel from the vehicle.

   Switch Replacement - Door Lock and Side Window - Passenger

   Removal Procedure

   
   

   	View Full Image

   
   

   	View Full Image

   
   
   1. Use a suitable flat-bladed tool to remove the door lock and side window switch from the door panel.
   2. Disconnect the electrical connector from the switch.

Expert:	Davo
Pos. Feedback:	99.4 %
Accepts:	1980
Answered:	4/4/2006

Master technician

ASE Master Technician/Advanced Automotive Diagnostic Technician