Accepted Answer

Wiper Motor

Removal & Installation

1. Before servicing the vehicle, refer to the Precautions Section.
2. Remove the wiper arm:
   
   Remove the wiper arm cap. Loosen the two wiper arm nuts.
   
3. Remove the cowl top cover.
   
   Remove the fastener of cowl top cover. Remove the cowl top cover.
   
   

   	View Full Image

   Fig. Cowl top cover

   
   
4. Remove the wiper motor and link assembly.
   
   Remove the five bolts of wiper link assembly. Disconnect the wiper motor connector.
   
   

   	View Full Image

   Fig. Wiper motor link assembly

   
   

To install:

1. Install the wiper motor and link assembly.
   
   Install the bolt of wiper link assembly tighten to specification: 61-96 inch lbs. (7-11 Nm). Connect the wiper motor connector.
   
2. Install the cowl top cover.
3. Install the fastener of cowl top cover.
4. Install the wiper arm.
   
   Align the wiper arm and blade at the original position. Tighten the two nuts of wiper arm to specification: 20-24 ft. lbs. (28-33 Nm). Install the cap of wiper arm.
   
As far as how much it would cost to have the job done,it is hard to say it would really just depend on what shop you choose,of course most any shop would be cheaper than the dealer.

Edited by mike kelly on 11/3/2009 at 8:30 AM

Expert:	Mike Kelly
Pos. Feedback:	98.6 %
Accepts:
Answered:	11/3/2009

Auto Mechanic

14 years experience as a auto mechanic,foreign and domestic.4 years running my own repair business.