There is 3 different types of Instrument Panels
Early, that needs to be reset via Scan Tool
Late that can be reset by:
To reset the service reminder indicator (SRI) carry out the procedure as following:
Ignition off
Press and hold in the trip odometer reset button
Switch on ignition
Continue pressing in the reset button for 10 seconds until Service Reminder Indicator starts flashing.
Release reset button within 4 seconds
Vehicles With Yazaki type Intrument Panel:
CLICK HERE
Hello,
still not working ?
I'm pressing the reset button then turn switch to ignition and non of the lights flash...even after 30 sec and plus.
The car was scan (in a non dealer garage)couple days a go and no problem detected.
Any sugestion ?
Thank you
Those are the only 3 ways & it sounds like you have the early Cluster, which would need Dealer Scan Tool to Reset...............sorry
Mechanic
Heavy Line Mech-, Mobile Electronics. Sales, Intallation & Repair for 30 years. R/S, etc.
OK
Thanks anyway
Stef
Sorry that wasn't what you wanted to hear, as I stated, there are 3 types & if the 2 do not work, then yours must be the "typical" early Cluster that Dealer Scan Tool is needed
THANK YOUThanks for using J/A