JustAnswer
>
Appliance
Ask A Question
|
Register
|
Login
|
Help
Appliance
Ask an Appliance Question, Get an Answer ASAP!
Have your own Appliance question?
8 Appliance Technicians are Online Now
characters left:
Not an Appliance Question?
Question
I have a Whirlpool Quiet Partner II model #DU941PWKQ1 purchased 12/2001. Started leaking at the door several months ago. I took the two pieces of metal with insulation attached off from the bottom of the dishwasher when it first started to leak. Leaks in the center of the door and on both sides. Definitely comes from inside the door (I can feel up from the bottom)and not from around the door. At times, the water gushes out in time with the sprayer arm. Other times, it seems to leak very little (I think when the dishwasher is very full).
Submitted: 39 days and 23 hours ago via
PartStore
.
Category: Appliance
Value: $24
Status: CLOSED
+
Read More
Optional Information
Make: Whirlpool Quiet Partner II
Model: DU941PWKQ1
Already Tried:
1. checked airvent, leveling, leaking anyplace but the door
Posted by
MRANSWER
39 days and 23 hours ago.
Answer
Thoroughly inspect the spray arms (lower and middle) for debris in the holes or splits. Water is being sprayed downwards and that is the cause of your leak. Also make sure dishwasher is level and has not been pushed back so front is lower than the rear.
39 days and 22 hours ago.
Reply
I found two holes clogged and no splits on the spray arms. There are holes in the lower spray arm that are clearly part of the manufacturing process. I am running the dishwasher now to see if that really was enough to cause this leaking. (the dishwasher is level so the front is not lower than the back). the dishwasher is still leaking. Any other ideas?
Accepted Answer
No, that is all this could be.
Expert:
MRANSWER
Pos. Feedback:
96.9 %
Accepts:
Answered:
10/13/2009
Home Appliance Technician
30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
+
Read More
Related Appliance Questions
I have a model wfmc3301uc washer. if I use the quick wash 25
Why wold the water not be draining. There is water left at
why does would a disposal hum? there is nothing in it I have
What is the part # for the motor brushes for model # 444-5
I can't get my removable rack back in the oven. help!
the tub is not spinning freely how do i get into the tub to
My top loading washing machine stopped draining...WHY?
where can I get new bearings and seal for model wfmc3200uc