JustAnswer
>
BMW
Ask A Question
|
Register
|
Login
|
Help
BMW
Ask a BMW Question, Get an Answer ASAP!
Have your own BMW question?
14 BMW Mechanics are Online Now
characters left:
Not a BMW Question?
Related Bmw Topics:
325i
,
Head
,
Chain
,
Guide
,
Motor
,
Replace
,
Tensioner
Question
do u have to take the head off a 93 325i m50 vanos motor to replace the chain guide that the tensioner pushes on and if not how do you do it
Submitted: 45 days and 18 hours ago.
Category: BMW
Value: $20
Status: CLOSED
Accepted Answer
The head can stay on to do it, but it will be very tricky when you go to slide the timing cover back into place. You may have to drop the oil pan down a little bit, Since the timing cover will be squeezed a little bit between the head and the oil pan when they are tightened. You run the risk of damaging the headgasket seal when installing the cover, be careful.
Once the timing cover is removed, you should be able to remove the e clip on the bottom of the tensioner guide, then just rotate it out to the left and slide it forward.
Expert:
bimmaster
Pos. Feedback:
100.0 %
Accepts:
Answered:
10/9/2009
BMW Technician
3 years dealer experience, master bmw tech
Related BMW Questions
HOW CAN I RELEASE THE BONNET LOCK ON MY E38
my speedometer stopped working , sporadic at first now perma...
how do i release the bonnet on my e38 bmw the cable sliped
I have an M3 e92 2008 model that i had just imported from
Multiple problem happened this morning. Turn signal not disp...
Sometimes first thing in a morning when starting a
need to registration
How do I unlock my car with the keys locked in the trunk?