Accepted Answer

 

INSTRUMENT PANEL ASSEMBLY View Full Image View Full Image Removal and Installation INSTRUMENT PANEL Removal Remove the center console. Refer to "CENTER CONSOLE". Remove the steering column. Refer to "Removal and Installation". Remove the combination meter. Refer to "COMBINATION METER". Remove defroster grille and disconnect the optical sensor harness. Remove side ventilator assembly LH. Remove the LH assist grip and windshield garnish. Remove side ventilator assembly RH. Remove the RH assist grip and windshield garnish. Remove instrument panel. Disconnect harnesses to instrument panel speakers LH and RH and remove speakers. Disconnect GPS antenna. Disconnect all remaining harnesses. Remove the passenger air bag module. Refer to "FRONT PASSENGER AIR BAG MODULE". Installation Installation is in the reverse order of removal. View Full Image CLUSTER LID C Pull cluster lid C towards rear of vehicle to release clips. Disconnect electrical connectors. Installation is in the reverse order of removal. View Full Image CLUSTER LID D Remove A/T finisher. Refer to "A/T FINISHER". Remove lower instrument panel LH. Refer to "LOWER INSTRUMENT PANEL LH". Remove lower instrument panel RH. Refer to "LOWER INSTRUMENT PANEL RH AND GLOVE BOX". Remove cluster lid C. Refer to "CLUSTER LID C". Remove cluster lid D. Pull the lid toward the rear of the vehicle to release the clips. Disconnect the electrical connectors. Installation is in the reverse order of removal. View Full Image LOWER INSTRUMENT PANEL LH Remove screws using power tool, and remove lower instrument panel LH. Pull to disconnect clips. Disconnect harnesses. Installation is in the reverse order of removal. COMBINATION METER Disconnect the negative battery cable. Remove the lower instrument panel LH. Refer to "LOWER INSTRUMENT PANEL LH". View Full Image Remove the meter cover. Remove cluster lid A. Remove screws using power tool and remove the combination meter assembly. Disconnect electrical connectors. Installation is in the reverse order of removal. A/T FINISHER View Full Image Remove the shift knob. Remove the console mask. Pull up to release clips and remove the A/T finisher. Disconnect harnesses. Installation is in the reverse order of removal. View Full Image LOWER INSTRUMENT PANEL RH AND GLOVE BOX Removal View Full Image Remove the instrument lower cover RH. Remove screws using power tool, release clips and remove glove box and housing as an assembly. Remove damper clip from glove box. Remove glove box pins and glove box. Using power tool, remove screws and glove box striker. Remove fuse block cover. Remove screws and glove box damper. Installation Installation is in the reverse order of removal. View Full Image CENTER CONSOLE Remove the lower instrument panel RH. Refer to "LOWER INSTRUMENT PANEL RH AND GLOVE BOX". Remove the A/T shifter. Refer to "Control Device Removal and Installation". Remove screws from center console. Disconnect electrical harnesses. Move front seats forward and remove the center console assembly. Installation is in the reverse order of removal.

 

 

HEATER CORE View Full Image Removal and Installation REMOVAL Remove the heater and cooling unit assembly. Remove the four screws and remove the upper bracket. Remove the four screws and remove the heater core cover. View Full Image Remove the heater core pipe bracket. Remove the heater core. NOTE: If the in-cabin microfilters are contaminated from coolant leaking from the heater core, replace the in-cabin microfilters with new ones before installing the new heater core. INSTALLATION Installation is in the reverse order of removal.

 

Expert:	brownjeff
Pos. Feedback:	100.0 %
Accepts:
Answered:	10/8/2009

ASE Certified Technician

17 years experience, ASE certified, dealership certified, Service Manager for 15 years,