JustAnswer
>
Chevy
Ask A Question
|
Register
|
Login
|
Help
Chevrolet
Ask a Chevy Question, Get an Answer ASAP!
Have your own Chevy question?
29 Chevy Mechanics are Online Now
characters left:
Not a Chevy Question?
Question
I own a 2006 corvette convertible. I am having electical problems. I go to start the car, the dash lights up but when pushing the brake and the push button starter, the dash goes dead (blacks out for 8-10 seconds). The starter does not engage and it will not start. The battery is fully charged and all dash, lights and radio work fine. This happend 2 weeks ago. I had it towed to the dealer. The dealer saw the problem but could not diagnose the problem as it went away and appeared intermittent. He had it 4 days and could not get the problem to come back. I picked up the car and drove it 3 days. Today, it is sitting in the garage again and won't start. I have checked and fuses and relays which appear to be good. About 1 year ago, I had a similar problem and they changed the batter due a defective cell. Today, the batter reads ok. Help would be appreciated as I am getting frustrated.
Submitted: 62 days and 7 hours ago.
Category: Chevy
Value: $22
Status: CLOSED
+
Read More
Optional Information
Year : 2006
Make : Chevrolet
Model : Convertible
Already Tried:
I have had it in the dealer but they could not find problem. Battery is reading 12.6 volts with a meter. Lights and Dash work fine until but starter button. Dash goes dead for 10 seconds. Fuses seem ok.
Posted by
Jettadan1
62 days and 6 hours ago.
Answer
I am assuming that the dealer chased down all wires for shorts. That being I would replace your push button start. Something inside is connecting more than it needs to.
Thanks Dan
62 days and 3 hours ago.
Reply
Why are you suggestion the starter button? What is causingn the dash to go dead or blank for 10 seconds. What if is was a ground connection issue? I don't necessary think replacing the starter button is acceptable answer without additional information on the dash issue.
Posted by
Jettadan1
62 days and 3 hours ago.
Info Request
I will opt out so you may find an expert that will give you a answer you like. Thanks Dan
Posted by
heavy_chevy_396
62 days and 3 hours ago.
Answer
Check the starter bolts and make sure they are tight. See if you can move that starter at all with your hand, if it is loose maybe the starter is grounding out at the dash ground and causing the dash to loose it's ground for a while. While you're down there might as well check the wire connections and wires insulation for being burned through and touching a ground.
57 days and 19 hours ago.
Reply
Sorry. I check the start and relay as 1 of the first items I reviewed when the problem started and it was ok. I took it back to the dealer yesterday. They found an anti theft relay that was bad and had it replaced.
Answer
Glad to hear the dealer found the problem.
Expert:
heavy_chevy_396
Pos. Feedback:
98.4 %
Accepts:
Answered:
9/25/2009
Chevy Mechanic
ASE certified.
+
Read More
Related Chevy Questions
I have a 2004 GMC 2500 HD 6.6L Turbo diesel with ...
I''m getting P0440 DTC on an 01 Cav. 2.2. I
what do the codes 101, 131 and 151 mean? we thought we had ....
Transmission
ENGINE CRANKS BUT WILL NOT START
I have a 305 small block and my carburator is choking out .....
If my truck is not changing gears what could the problem be
what kind of pipe to connect the two hoses