JustAnswer
>
Boat
Ask A Question
|
Register
|
Login
|
Help
Boat
Ask a Boat Question, Get an Answer ASAP!
Have your own Boat question?
5 Marine Mechanics are Online Now
characters left:
Not a Boat Question?
Question
I have a mecruiser 888, I need to replace the impeller on the water pump in the lower unit. Is it real difficult and where do i go in after it.
Submitted: 132 days and 17 hours ago.
Category: Boat
Value: $9
Status: AWAITING CUSTOMER ACTION
Answer
Hello. No, it is not particularly difficult, but I advise you to pick up a manual on the motor first - the Seloc manuals are best and are available online. You'll also need the correct water pump kit for that drive, which will include the impeller, gaskets, etc. The water pump is located inside the lower unit, which needs to be dropped from the drive. You'll need to drain the gear oil first. It is held in place by a series of nuts and/or bolts around the anti-ventilation plate (note that one bolt will be under the zinc trim tab). It is important that the shift be put in forward before you attempt to remove the lower unit. Once the lower unit is dropped you will see the water pump housing, which can be unscrewed and the impeller replaced.
Expert:
Captain Dave
Pos. Feedback:
98.5 %
Accepts:
Answered:
7/14/2009
Marine Mechanic
USCG Licensed Captain, 20+ Years Boating, Fishing, Maintenance and Repair Experience
Related Boat Questions
Hello! I have CMD 4.2 320 with Bravo III. When putting it to
Hello. My engine is a 320 hp V 8 mercruiser the problem rec...
I am looking for a boat similar to the Doral but preferably
i am looking for a part that I don't know what the official
I have an 89 bayliner with an OMC 460 engine and an adapter
I have a 90 HP Johnson Outboard---2004. I had aproblem star...
Mercruiser inboard motor, Serial # 5770788, 165 hrsp. Pro...
What year and engines in a Seadoo speedster did they go to