JustAnswer
>
Boat
Ask A Question
|
Register
|
Login
|
Help
Boat
Ask a Boat Question, Get an Answer ASAP!
Have your own
Boat
question?
6 Marine Mechanics are Online Now
Type your boat question here...
characters left:
Not a Boat Question?
Question
I have a mecruiser 888, I need to replace the impeller on the water pump in the lower unit. Is it real difficult and where do i go in after it.
Submitted: 250 days and 21 hours ago.
Category: Boat
Value: $9
Status: AWAITING CUSTOMER ACTION
Answer
Hello. No, it is not particularly difficult, but I advise you to pick up a manual on the motor first - the Seloc manuals are best and are available online. You'll also need the correct water pump kit for that drive, which will include the impeller, gaskets, etc. The water pump is located inside the lower unit, which needs to be dropped from the drive. You'll need to drain the gear oil first. It is held in place by a series of nuts and/or bolts around the anti-ventilation plate (note that one bolt will be under the zinc trim tab). It is important that the shift be put in forward before you attempt to remove the lower unit. Once the lower unit is dropped you will see the water pump housing, which can be unscrewed and the impeller replaced.
Expert:
Captain Dave
Pos. Feedback:
98.5 %
Accepts:
2087
Answered:
7/14/2009
Marine Mechanic
USCG Licensed Captain, 20+ Years Boating, Fishing, Maintenance and Repair Experience
Related Boat Questions
I am looking for an Owners Manual for a 1994 Bayliner Maxum,
Steering tgracking problem. Boat wonders, slow to react, tur...
I have a 1991 225TXRP outboard. The #1 Cylinder melted down
I have a wave venture 700 2 cycle jet ski. the two rear engi...
how to winterize a 5.0 ford motor and cobra outdrive
I have a Volvo Penta KAMD 42P-A engine in my fishing boat.
My steering is frozen at the motor because of corrision. I
chrysler marine v-8, gasoline marine engine. no i.d. on-boar...