HVAC

Ask a HVAC Question, Get an Answer ASAP!

Have your own HVAC question?

HVAC Technicians are Online Now

characters left:

Not a HVAC Question?

Question

have an oil furnace that kicks out on stack control .Flue is clear damper is located upstream of control. does stack control wear outby kicking out at lower temp? any ideas unit stays running after 3 times

Submitted: 144 days and 8 hours ago.

Category: HVAC

Value: $15

Status: CLOSED

Posted by Billy 144 days and 8 hours ago.

Info Request

Have you put the stack control back in step?

144 days and 7 hours ago.

Reply

what do you mean?

Posted by Billy 144 days and 7 hours ago.

Info Request

with the cover off you will see at the bottom are vertical rows of contacts all stacked in rows. At the center front bottom is the lever. You gently pull out on the lever until all contacts have activated forward. Then you slowly release the lever back in and it puts the steps back in proper sequence.

144 days and 7 hours ago.

Reply

dont recall seeing a lever contacts are in upper right corner of control.unit is not close will have to check next trip how do contacts operate

Edited by XXXXXXXXX on 6/30/2009 at 10:59 PM

Posted by Billy 144 days and 7 hours ago.

Info Request

Also pull pull the limit sampling tube, if you havent already and make sure it is clean and not deteriorated.The stack control is between the furnace and barometric damper isn't it?

144 days and 7 hours ago.

Reply

yesit is located before damper damper may be problematic.will replace if it affects stack control.

Posted by Billy 144 days and 7 hours ago.

Info Request

Ok, if you have further questions let me know. I figured out just about everything on oilburners except how to not smell like fuel oil when your done working on them. Good luck

144 days and 7 hours ago.

Reply

HOW DO I PAY?

Answer

I have not sent the answer link yet due to I do not know if I have helped you. I do not want anyone paying unless they got something positive or a help from my answers. If you found the information helpful you may click the accept. If you would rather wait and see until your project is over I understand totally.

Accepts:
Expert:	Billy
Pos. Feedback:	99.7 %
Answered:	6/30/2009

HVAC Mechanic

State Licensed Mechanical Contractor, Heating, Cooling, Oil Burners, Heat Pumps, Boilers, Geothermal

144 days and 7 hours ago.

Reply

thANK YOU WILL get back to you as soon as possible

Posted by Billy 144 days and 7 hours ago.

Info Request

you are welcome, good luck

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

HVAC

Have your own HVAC question?

Question

have an oil furnace that kicks out on stack control .Flue is clear damper is located upstream of control. does stack control wear outby kicking out at lower temp? any ideas unit stays running after 3 times

Info Request

Have you put the stack control back in step?

Reply

what do you mean?

Info Request

Reply

dont recall seeing a lever contacts are in upper right corner of control.unit is not close will have to check next trip how do contacts operateEdited by XXXXXXXXX on 6/30/2009 at 10:59 PM

Info Request

Also pull pull the limit sampling tube, if you havent already and make sure it is clean and not deteriorated.The stack control is between the furnace and barometric damper isn't it?

Reply

yesit is located before damper damper may be problematic.will replace if it affects stack control.

Info Request

Ok, if you have further questions let me know. I figured out just about everything on oilburners except how to not smell like fuel oil when your done working on them. Good luck

Reply

HOW DO I PAY?

Answer

Reply

thANK YOU WILL get back to you as soon as possible

Info Request

you are welcome, good luck

Related HVAC Questions

dont recall seeing a lever contacts are in upper right corner of control.unit is not close will have to check next trip how do contacts operate

Edited by XXXXXXXXX on 6/30/2009 at 10:59 PM