JustAnswer
>
Boat
Ask A Question
|
Register
|
Login
|
Help
Boat
Ask a Boat Question, Get an Answer ASAP!
Have your own Boat question?
4 Marine Mechanics are Online Now
characters left:
Not a Boat Question?
Related Boat Topics:
Jet
,
Low
,
Ski
,
Part
,
Shop
,
Work
,
Type
,
Wire
,
Check
,
Codes
Question
What would cause my speed read out not to work on my Polaris 750 jet ski? Also it keeps flashing low voltage on the lcd, even with a new battery.
Submitted: 151 days and 19 hours ago.
Category: Boat
Value: $14
Status: CLOSED
Accepted Answer
Hello, well first the speed.... Could be a few things. First, get under the ski. Where the gate is, the narrow part in the front. you will see what appears to be a little fin. Check and see if it is clogged. That is where it collects the pressure to show your speed.
Now as far as the low voltage , must be a loose wire or charging system. If you are not savvy of this type of repair, you should take to a shop to have the codes read. This will tell you where the problem is. Joe
Expert:
Dr. Joe
Pos. Feedback:
100.0 %
Accepts:
Answered:
6/25/2009
Marine Mechanic
over 30 years tec.
Related Boat Questions
I have a mercruiser 3.0L, the motor runs fine. However, the
HI .. I have a boat with 200 hp mariner outboard every time
I HAVE A 2007SEA DOO RXT SUPERCHARD JET SKI. IT DOES NOT GO
I have a 2001 Kawasaki 900 STX. It won't start. When I pre...
hello i have a b1914 evinrude with long and short shafts its
Bravo 2 Problem, Engines where overheating, Slipped Riviera
I have a 87 Four Winns 195 sundowner. The Steering is very
Hi - I have a 23' Yamaha SX 230 with two 1052cc engines. I