JustAnswer
>
Pontiac
Ask A Question
|
Register
|
Login
|
Help
Pontiac
Ask a Pontiac Question, Get an Answer ASAP!
Have your own Pontiac question?
19 Pontiac Mechanics are Online Now
characters left:
Not a Pontiac Question?
Related Pontiac Topics:
Car
,
Gto
,
Hot
,
Key
,
Jack
,
Jump
,
Pull
,
Turn
,
Test
,
Wire
Question
My 66 GTO just stopped trying to start. One minute it started, the next it didn't. No clicks, no nothing. Car is on jack stands, but now i need to know how to teast whether it is the starter, etc.
Submitted: 153 days and 20 hours ago.
Category: Pontiac
Value: $9
Status: CLOSED
+
Read More
Posted by
JamesH
153 days and 20 hours ago.
Answer
Sounds like the starter could be the issue I would test the wires with the car on for voltage if the starter is getting power then you will have to pull it and have it tested. If the starter is not getting power then you will have to check the connections at the battery. Let me know what you find. Thanks
153 days and 20 hours ago.
Reply
I want to know how to jump start the car by-passing the ignition switch
Accepted Answer
Turn the key on take a screw you jump accrosed the lead wire small one from that to the hot wire coming from the battery. If he starter is good it will turn over and that is bypassing the solenoid
Expert:
JamesH
Pos. Feedback:
100.0 %
Accepts:
Answered:
6/21/2009
Auto Service Tech
Auto Service Tech 3 Years Hands On Experience
Posted by
JamesH
153 days and 19 hours ago.
Info Request
I see that I helped you the other day... Definately sounds like the starter solenoid just keep me posted I wanna make sure we get the issue taken care of..
+
Read More
Related Pontiac Questions
I have a 1998 Pontiac grand am that keeps shutting off while
car will not shift up at all, will not go over 20, trans bee...
WILL THE SERIES 3800 TYPE III ON A 2004 HOLD UP AS WELL AS
i just purchaced 92 pont.g.p. 3.4 the day i bought it it ran
95 Grand Am. 3.1 6 cyl. SE model. How do you remove the
I have a 1996 Trans-Am with a bad motor. Have found a 1996
fuse panel location
car wont crank over all of a sudden sometimes you can by pla...