Dear Glenn, thanks for the first answer but maybe I did not state my problem properly. It seems that water got under the top layer (the picture of wood on top of the laminate) and that top layer is what is bubbling. The laminate board still seems flat is still resting on the underlayment. Is there a solution for this such as ironing with a warm iron or anything else that will make the top layer secure to the board again. Or do I need to tile over it... lol... hope not...
Thanks
Hello XXXXXXX,
Thanks for coming to Just Answer to ask a question.
Glenn has aked me to try and assist you. I as well have laminate and had to pull it up i nthe bathrook due to this occuring. I tried the iron approach and even tried shutting the door and placeing a heater in the bathroom and got the heat up to 130 degrees for one day and the seams never seated back down firm. I would up pulling the floor up and placeing stick down tiles down but it to does not hold up to the water. Your definetly looking at needing to pull this stuff up because the water has caused the boards to swell just like OSB board does when it gets wet.
Handyman
Homeowner, Skills in Carpentry Electrical Plumbing Masonry Wood Working Automotive tech.