JustAnswer
>
HVAC
Ask A Question
|
Register
|
Login
|
Help
HVAC
Ask a HVAC Question, Get an Answer ASAP!
Have your own HVAC question?
HVAC Technicians are Online Now
characters left:
Not a HVAC Question?
Question
I have 2 linked rheem RHlp 0304v07123 waterheaters they have not run for a year or so. They have the piezo igniter. I can get the pilot ignited but when you release the button it slowly goes out. The flame of the pilot is all blue. My best guess is that the thermo couple needs to be replaced. The thermo cupple on these unites has 2 wires going to the burner one copper one silver. What should I replace it with if indeed that is the problem or should I check some other things. thanks Greg Thomas
Submitted: 165 days and 17 hours ago.
Category: HVAC
Value: $9
Status: AWAITING CUSTOMER ACTION
+
Read More
Posted by
Rick Mather
165 days and 15 hours ago.
Answer
Try cleaning the Flame Rod with scotch brite and or steel wool if that does not work replace the flame rod. PS thermo coulpes don't have wires that go to them
165 days and 8 hours ago.
Reply
Dear Rick I am going to click on accept but I would like a small bit of imformation. The part I might need is a flame rod. ( the rod looked like it was still in good shape but dirty]is the flame rod the end of the bare silver and copper wire or is it where the pliot light orignates. I am a carpenter by trade so I am handy. The heaters are in a very remote area of Idaho and is not easily axcessable and there are no parts houses around.
Accepted Answer
Yes it has wires to it and can be cleaned with scotch brite and or steel wool
Expert:
Rick Mather
Pos. Feedback:
96.1 %
Accepts:
Answered:
6/9/2009
HVAC Technician
35 years experience, HVAC
Posted by
Rick Mather
164 days and 10 hours ago.
Answer
Thanks for the accept and please post positive feedback
+
Read More
Related HVAC Questions
my outdoor unit won't cut off. it has been running since sun...
Dear goodman tech, I need to replace my old carrier evapora...
I have HVAC question and wish to work with Billy Journeyman.
I have a Honeywell RUDD round thermostat that I pulled off
i have a bryant ac unit just noticed that the low side line
Replacing a York T874R1046 thermostat with a Honeywell RTH76...
I'm trying to wire a Rheem heat pump to a Honeywell Thermost...
staying in an apt in fla that is rarely used. came today and