JustAnswer > HVAC

HVAC

Ask a HVAC Question, Get an Answer ASAP!

Have your own HVAC question?

11 HVAC Technicians are Online Now

characters left:

Not a HVAC Question?

Question

I installed a vision pro 8000 and my unit will not kick on. Is there a chance that because I have a Train inside and a Ruud outside the wiring should be different. I have 8 wires (Bl, Y, R, BL, O, B, G, Wh and Bro) coming from the wall. I cant seem to figure out what I am doing wrong. I live in Florida and it is getting really hot. How should I arrange the wiring. Any help would be greatly appreciated.

Submitted: 342 days and 5 hours ago.

Category: HVAC

Value: $15

Status: AWAITING CUSTOMER ACTION

Posted by Rick Mather 342 days and 4 hours ago.

Answer

Is the jumper between Rc And Rh instaled

If you jumper R to G and Y the unit should start if you did not short out the transformer R to G will run fan only and add the Y and now you have cooling This is all 24vac so don't scared its not going to harm you

342 days and 4 hours ago.

Reply

Maybe this will help...

The jumper is between the Rc & R. I have the red wire in the bottom "r",re the yellow wire in the "y" the green wire in the "g" and the Blue wire in "c". But I have four wires still remaining, an Orange, Brown & Black and White. Which wire do I place in the third one down.
Rc Rc
* R R (here is where the Red wire is)
W O/B (I dont know color wire to put here).
Y Y (yellow)
G G (green)
C C (blue)

Answer

Are you there if so what I need to get you going is the designation of each terminal used on the old stat and the color white etc that was attatched to each then the terminals available on new stat from there I can tell you what to doJim Eastwood39915.1027665509

Expert:	Jim Eastwood
Pos. Feedback:	100.0 %
Accepts:	135
Answered:	4/11/2009

HVAC Mechanic

I HAVE OVER 35 YEARS EXPERIENCE INSTALLING ,SERVICING, SELLING AND TROUBLESHOOTING RESIDENTIAL HVAC

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

HVAC

Ask a HVAC Question, Get an Answer ASAP!

Have your own HVAC question?

Question

Answer

Is the jumper between Rc And Rh instaled If you jumper R to G and Y the unit should start if you did not short out the transformer R to G will run fan only and add the Y and now you have cooling This is all 24vac so don't scared its not going to harm you

Reply

Answer

Are you there if so what I need to get you going is the designation of each terminal used on the old stat and the color white etc that was attatched to each then the terminals available on new stat from there I can tell you what to doJim Eastwood39915.1027665509

Related HVAC Questions

Is the jumper between Rc And Rh instaled

If you jumper R to G and Y the unit should start if you did not short out the transformer R to G will run fan only and add the Y and now you have cooling This is all 24vac so don't scared its not going to harm you