JustAnswer
>
Volvo
Ask A Question
|
Register
|
Login
|
Help
Volvo
Ask a Volvo Question, Get an Answer ASAP!
Have your own
Volvo
question?
19 Volvo Mechanics are Online Now
Type your volvo question here...
characters left:
Not a Volvo Question?
Question
850 SR 2.0 1994 estate immobiliser problem: found 2/28, relays in front 213 and 214 not present. What is a jump wire and how do i fit it?
Submitted: 386 days and 8 hours ago.
Category: Volvo
Value: $9
Status: AWAITING CUSTOMER ACTION
+
Read More
Optional Information
1994 Volvo 850 SR 2.0
Already Tried:
Found relay 2/28 (213, 214 not there).
Question: what is a jumper wire and how do i fit it?
Answer
Hello,
A jumper wire is just a wire to connect between the two points.
It can be a wire that is stripped on both ends or you could install male spade connectors.
You want to jump terminal 1B to 5B. You will need to look at the digram on the relay to math the terminals with the slots.
Both of theese will be Green with Red stripe wires if you look at the back side.
This will bypass the immobiilizer system to start the car.
Expert:
Michael
Pos. Feedback:
98.1 %
Accepts:
905
Answered:
2/19/2009
ASE Certified Technician
Volvo Master technician, ASE Master, EPA 608&609 certified
+
Read More
Related Volvo Questions
my keyless remote went bad and my alarm is set. the key will
I am changing the disk brake pads on a 2005 s40-t5. I have
What does it mean when the Check Engine light is on in my 19...
I spilled coffee all over my gear shift and it's now locked
My left rear electric window lowers but will not raise. Wha...
I asked a question and paid $15 last night and I haven't got
I took my car in for service and to check out a loud knockin...
I have a 98 V90 wagon and I'm having a problem with the alar...