Answer

Hi,

 

Below are directions to remove the door panel, and door handle:

REMOVAL

1.	Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only). View Full Image

2.	Remove the quadrant inner cover.

3.	Remove the rear view mirror mounting screws and then remove the rear view mirror. Disconnect the remote control and mirror heated connector (Electric type only) View Full Image

4.	Remove the front door inside handle bezel. View Full Image

5.	Remove the mounting screw (1EA) from the door pull handle and then remove the door trim pull handle. View Full Image

6.	Remove the power window main switch. Disconnect the power window switch connector. View Full Image

7.	Remove the mounting screw (lEA) from the trunk opener switch and then disconnect the trunk opener switch connector. View Full Image

8.	Remove the mounting screws (4EA) from the front door trim panel. View Full Image

9.	Insert a screwdriver between the trim fasteners and then remove the door trim panel. Disconnect the door lamp connector. View Full Image

10.	Remove the pull handle mounting bracket and door inside handle and then remove the door trim seal. View Full Image

 

Remove the front door belt weatherstrip. View Full Image

12.	Remove the carrier plate screws from the regulator channel. View Full Image

13.	Pull the door glass out through the window slot. View Full Image

14.	Remove the door regulator channel mounting bolts and then remove the door regulator assembly. View Full Image

15.	Turn the rod holding clip and then remove the rod from the latch assembly. View Full Image

16.	Remove the outside door handle mountings bolts. View Full Image

17.	Remove the door latch and door lock actuator. View Full Image