Answer

Hi, Welcome to Just Answer.

 

LEFT SIDE

1. Disconnect battery ground cable and drain cooling system.
2. Remove intake manifold and exhaust crossover pipe.
3. Remove alternator bracket and oil dipstick tube.
4. Remove rocker arm cover, rocker arms and pushrods.
5. Remove cylinder head bolts and cylinder head.
6. Reverse procedure to install. Torque cylinder head bolts in sequence, Fig. 5, to 66 ft. lbs.

RIGHT SIDE

1. Disconnect battery ground cable and drain cooling system.
2. Raise and support vehicle.
3. Disconnect exhaust pipe from manifold.
4. Remove cruise control servo bracket.
5. Remove intake manifold and exhaust crossover pipe.
6. Remove rocker arm cover, rocker arms and pushrods.
7. Remove cylinder head bolts and cylinder head.
8. Reverse procedure to install. Torque cylinder head bolts in sequence, Fig. 5, to 66 ft. lbs.

Fig. 5 Cylinder head installation & torque sequence

View Full Image

 

 

Paying the Deposit does not pay me.
Please ACCEPT my answer when you are satisfied.
Bonuses and positive feedback are appreciated!
PLEASE ASK IF YOU NEED MORE HELP

Expert:	Dan
Pos. Feedback:	100.0 %
Accepts:
Answered:	1/27/2009

GM Trained A Tech

100% GM Trained ASE Master tech. 10+ yrs GM experience